RDX L4-2.3L Turbo (2008)
3. Tighten the bolt to 49 N-m (5.0 kgf-m, 36 lbf-ft) with a torque wrench and 19 mm socket (C). Do not use an impact wrench. If you are using a
new pulley bolt or new crankshaft, tighten the bolt to 177 N-m (18.0 kgf-m, 130 lbf-ft) with a torque wrench and 19 mm socket, loosen the bolt
and tighten it 49 N-m (5.0 kgf-m, 36 lbf-ft).
4. Tighten the pulley bolt an additional 90°.
5. Install the drive belt.
6. Install the splash shield.
7. Install the front wheels.