RDX L4-2.3L Turbo (2008)
Rocker Arm Assembly: Overhaul
Rocker Arm and Shaft Disassembly/Reassembly
NOTE:
^
Identify each part as it is removed so that each item can be reinstalled.
^
Inspect the rocker arm shaft and rocker arms.
^
If reused, the rocker arms must be installed in the same positions.
^
When removing, or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders and rocker arms
on the shaft.
^
Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact points.
^
Bundle the rocker arms with rubber bands to keep them together as a set.
^
When replacing the intake rocker arm assembly, remove the fastening hardware from the new intake rocker arm assembly.