RDX L4-2.3L Turbo (2008)
15. Tighten the upper torque rod mounting bolt.
16. Raise the vehicle on the lift to full height.
17. Using the new gasket (A), then tighten the two bolts at the three-way catalytic converter (TWC) front joint.
18. Install the bolts securing the steering gearbox mounting brackets.
19. Install the power steering (P/S) fluid line bracket, and secure the hose with the hose clamps.
20. Install the splash shield.
21. Install the front wheels.
22. Refill the engine with engine oil.
