RDX L4-2.3L Turbo (2008)
4. Remove the engine wire harness connectors and wire harness clamps from the intake manifold.
^
Four fuel injector connectors
^
Throttle actuator connector
^
Manifold absolute pressure (MAP) sensor connector
^
Intake manifold temperature (IAT) sensor connector
^
Turbocharger bypass control solenoid valve connector
5. Remove the quick-connect fitting cover (A), then disconnect the fuel feed hose.
6. Remove the ground cable (A), vacuum hoses (B), brake booster vacuum hose (C), and turbocharger bypass control solenoid valve bracket
mounting bolt (D).
7. Remove the evaporative emission (EVAP) canister hose (A) and water bypass line bracket mounting bolt (B).
