RDX L4-2.3L Turbo (2008)
Crankshaft Main Bearing Seal: Service and Repair
Transmission End Crankshaft Oil Seal Installation - In Car
Special Tools Required
^
Driver 07749-0010000
^
Oil seal driver attachment, 96 mm 07ZAD-PNAA100
1. Remove the transmission.
2. Remove the drive plate.
3. Clean, and dry the crankshaft oil seal housing.
4. Use the driver and attachment to drive a new oil seal squarely into the block to the specified installed height.
5. Measure the distance between the engine block (A) and oil seal (B).
6. Install the drive plate.
7. Install the transmission.
