RDX L4-2.3L Turbo (2008)
Installation
1. Install the auto-tensioner.
2. Remove the pin or lock pin (P/N 14511-PNA-003) from the auto-tensioner.
3. Remove all of the old liquid gasket from the chain case cover mating surfaces, bolts, and bolt holes.
4. Clean, and dry the chain case cover mating surfaces.
5. Apply liquid gasket, P/N 08717-0004, 08718-0001, 08718-0003, or 08718-0009, evenly to the chain case mating surface of the chain case cover.
Install the component within 5 minutes of applying the liquid gasket.
NOTE:
^
If you apply liquid gasket P/N 08718-0012, the component must be install within 4 minutes.
^
If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.
