RDX L4-2.3L Turbo (2008)
26. Remove the water bypass hoses (A), then remove the exhaust manifold (B).
27. Remove the water bypass pipe (C) and water bypass hose (D) from the exhaust manifold.
Installation
1. Install the water bypass pipe (A) with a new O-ring (B), then install the water bypass hose (C).
2. Install the exhaust manifold (D) with a new gasket (E) and new self-locking nuts (F) and bolts (G), and tighten the bolts and nuts in a crisscross
pattern in two or three steps, beginning with the inner bolt.
3. Install the water bypass hoses (H).
4. Pour new engine oil into turbocharger oil line.
5. Install the turbocharger assembly (A) with a new gasket (B).
NOTE: Use care when installing the turbocharger assembly. Do not turn the actuator rod adjusting nut, or touch the impeller.
