RDX L4-2.3L Turbo (2008)
10. Loosely tighten the 16 x 1.5 mm bolt with new washers (C), then install the oil return pipe with new gaskets (D).
11. Lower the vehicle on the lift.
12. Tighten the 10 x 1.25 mm nut.
13. Raise the vehicle on the lift to full height.
14. Tighten the 16 x 1.5 mm bolt.
15. Lower the vehicle on the lift.
16. Install the intake air duct (turbocharger inlet connecting tube).
