RDX L4-2.3L Turbo (2008)
Blower Motor: Service and Repair
Blower Unit Removal/Installation
Blower Unit Removal/Installation
1. Remove the glove box.
2. Remove the climate control unit.
3. Remove the harness clip (A), the self-tapping screws, and the passenger's heater duct (B).
4. Remove the harness clip (A), and bolts. Cut the plastic cross brace (B) in the glove box opening with diagonal cutters in the area shown. Retain
these parts to be reinstalled later.
5. Disconnect the connector (A) from the recirculation control motor.