RDX L4-2.3L Turbo (2008)
Control Assembly: Service and Repair
Audio-HVAC Subdisplay Unit Removal/Installation
Audio-HVAC Subdisplay Unit Removal/Installation
(with navigation)
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the dashboard.
1. Remove the dashboard center upper panel.
2. Remove the screws, then pull out the audio-HVAC subdisplay unit (A).
3. Disconnect the connector (B) and remove the audio-HVAC subdisplay unit.
4. Install the audio-HVAC subdisplay unit in the reverse order of removal.
