RDX L4-2.3L Turbo (2008)
5. If you feel too much or too little drag, loosen the locknut with the locknut wrench and adjuster, and turn the adjusting screw until the drag on the
feeler gauge is correct.
6. Tighten the locknut to the specified torque, and recheck the clearance. Repeat the adjustment if necessary.
Specified Torque
Intake:
7 x 0.75 mm
20 N-m (2.0 kgf-m, 14 lbf-ft)
Apply engine oil to the nut threads.
Exhaust:
7 x 0.75 mm
14 N-m (1.4 kgf-m, 10 lbf-ft)
Apply engine oil to the nut threads.
7. Rotate the crankshaft 180° clockwise (camshaft pulley turns 90°).
8. Check and, if necessary, adjust the valve clearance on No. 3 cylinder.
9. Rotate the crankshaft 180° clockwise (camshaft pulley turns 90°).
