RDX L4-2.3L Turbo (2008)
Tire Pressure Module: Service and Repair
TPMS Control Unit Replacement
NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the initiators and the tire
pressure sensors.
1. Make sure the ignition switch is OFF.
2. Remove the driver's dashboard undercover.
3. Disconnect the TPMS control unit connector (A).
NOTE: The TPMS control unit is located under the steering column.
4. Remove the TPMS control unit (B) from the bracket (C).
NOTE: While separating the TPMS control unit from the bracket, release the hook (D) on the TPMS control unit using a flat-tipped screwdriver
(E), and push up to release it from the bracket.
5. Install the TPMS control unit in the reverse order of removal.
NOTE: Make sure the TPMS control unit is properly installed. You will hear a click when the TPMS control unit is securely mounted on the
bracket.
6. Connect the HDS and memorize the pressure sensor IDs. Do not memorize the IDs automatically.
