RDX L4-2.3L Turbo (2008)
10. If the transmission range switch continuity check is OK, replace the faulty transmission range switch harness. If there is no continuity between any
terminals, check the transmission range switch installation. If the switch installation is OK, replace the switch.
11. Check the connector for rust, dirt, or oil, then connect the connectors securely.
12. Install the battery base.
13. Install the battery tray, the battery, the battery cover, and the battery hold-down bracket, then reconnect the battery cables.
14. Enter the anti-theft codes for the audio system and the navigation system (if equipped). Set the clock (on vehicles without navigation).
15. Do the power window control unit reset procedure.
