RDX L4-2.3L Turbo (2008)
16. Apply liquid gasket on the cam chain case, and the No. 5 rocker shaft holder mating areas. Install the cylinder head cover within 5 minutes of
applying the liquid gasket.
NOTE:
If too much time has passed after applying the liquid gasket, remove it and reapply.
17. Reinstall the original head cover gasket into the cylinder head cover.
18. Set the spark plug seals on the spark plug tubes. Place the cylinder head cover on the cylinder head, then slide the cover slightly back and forth to
seat the head cover gasket.
19. Inspect the cylinder head cover washers. Replace any washer that is damaged or deteriorated.