RDX L4-2.3L Turbo (2008)
Brake Fluid Level Sensor/Switch: Testing and Inspection
Brake Fluid Level Switch Test
Check for continuity between the terminals (1) and (2) with the float in the down position and in the up position.
NOTE:
-
Remove the brake fluid completely from the reservoir. With the float down, there should be continuity.
-
Fill the reservoir with brake fluid to the MAX (upper) level (A). With the float up, there should be no continuity.
-
If both the ABS/VSA indicator and the brake system indicator come on at the same time, check the VSA system first.
-
If the parking brake switch and fluid level switch are OK, but brake system indicator does not function, check the VSA system.