RDX L4-2.3L Turbo (2008)
Electric Load Sensor: Service and Repair
ELD Replacement
1. Remove the under-hood fuse/relay box.
2. Remove the screw (A).
3. Turn the housing over, then remove the screw (A).
4. Turn the housing over again. Using two flat-tip screwdrivers, release the tabs (A), and pry up the fuse/relay box base (B) from the fuse/relay box
housing (C).
NOTE: Make sure the terminals (D) are not bent or damaged.
5. Remove the ELD (A).
