acura Workshop Repair Guides

Acura (Honda) Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Wiper Switch: Service and Repair

Wiper/Washer Switch Test/Replacement

1. Remove the steering column covers.
2. Disconnect the windshield wiper switch 8P connector (A) from the wiper/washer switch (B).

3. Remove the two screws, then pull out the wiper/washer switch.
4. Check for continuity between the terminals in each switch position according to the table.

5. If the continuity is not as specified, replace the switch.

Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Wiper Switch > Component Information > Locations > Page 1265

< PREV PAGE NEXT PAGE >