RDX L4-2.3L Turbo (2008)
Seats with Side Airbags
Seats with side airbags have a "SIDE AIRBAG" label on the seat-back.
-
When cleaning, use a damp cloth to clean the seat. Do not soak the seat with liquid. Do not spray steam on the seat.
-
Do not repair a torn or frayed seat-back cover. Replace the seat-back cover.
-
After a collision where the side airbag was deployed, replace the side airbag and seat frame with new parts. If the seat-back cushion is split, it must
be replaced.
-
Never put aftermarket accessories on the seat (covers, pads, seat heaters, lights, etc.).
Disconnecting System Connectors
Turn the ignition switch OFF, disconnect the negative cable from the battery, and wait at least 3 minutes before beginning the following procedures.
-
Before disconnecting the cable reel 4P connector (1) disconnect the driver's airbag 4P connector (2).
-
Before disconnecting SRS unit connector B from the SRS unit, disconnect both seat belt tensioner 4P connectors and both seat belt buckle
tensioner 4P connectors (3, 4, 5, 6).
