RDX L4-2.3L Turbo (2008)
Suspension Spring ( Coil / Leaf ): Removal and Replacement
Front Suspension
Damper/Spring Removal and Installation
Removal
1. Raise the front of the vehicle, and support it with safety stands in the proper locations.
2. Remove the front wheel.
3. Remove the wheel sensor harness clip (A), the wire guide (B), and the brake hose bracket (C) from the damper (D). Do not disconnect the wheel
sensor connector.
4. Disconnect the stabilizer link from the damper.
5. Remove the damper pinch bolts (A) and self-locking nuts (B) from the damper.
6. Remove the lid (A) from the cowl cover.