RDX L4-2.3L Turbo (2008)
Installation
1. Clamp the new damper housing, front wheelhouse, front damper extension, front bulkhead, front end outrigger, and measure the front
compartment diagonally.
2. Check the body dimensions.
-
Engine compartment
-
Engine/transmission mount position
-
Front damper extension position
-
Engine compartment and front floor under view
-
Repair chart top view
-
Repair chart side view
3. Tack weld the new parts and front bulkhead into position.
4. Temporarily install the front subframe, and check the front side frame position.
5. Temporarily install the hood, front fender, headlight, and front bumper, then check for differences in level and clearance. Make sure the body lines
flow smoothly.
6. Do the main welding.
-
Weld the damper housing (A) and front side frame (B).
-
Weld the damper housing and damper housing gusset (C) to the dashboard upper stiffener (D).
-
Weld the front damper extension A (E) and dashboard upper side member (F).
