RDX L4-2.3L Turbo (2008)
19. Check the height (A) of the 8 x 53 mm ATF joint pipe (B) between the top (C) of the pipe and solenoid valve body mounting surface (D). The
height is about 7 mm (0.3 inch). If the height is over 7 mm (0.3 inch), push the pipe until it bottoms in the accumulator body.
20. Install the new gasket (A) on the transmission housing, and install the 8 x 34.5 mm ATF joint pipe (B) with the filter end into the transmission
housing and 8 x 25.2 mm ATF pipe (D).