RDX L4-2.3L Turbo (2008)
Shifter A/T: Removal and Replacement
Shift Lever Removal
Shift Lever Removal
1. Remove the center console panel, and driver's center console lower cover.
2. Shift the transmission to R.
3. Remove the nut securing the shift cable end.
4. Rotate the socket holder (A) on the shift cable (B) a quarter turn; the tab (C) on the socket holder will be in the opening (D) of the shift cable
bracket (E). Then slide the holder to remove the shift cable from the bracket. Do not remove the shift cable by twisting the shift cable guide (F).
5. Disconnect the shift lock solenoid connector (A) and park pin switch/A/T gear position indicator panel light connector (B).