RDX L4-2.3L Turbo (2008)
Shifter A/T: Removal and Replacement
Shift Lever/Shift Cable Bracket Assembly Replacement
Shift Lever/Shift Cable Bracket Assembly Replacement
NOTE: Refer to the Shift Lever Disassembly and Reassembly as needed during the following procedures.
1. Remove the shift lever.
2. Grasp the shift lever boot ring, and slip it out of the shift lever knob cover.
3. Remove the shift lever button ring (A).
4. Remove the screws (B), then remove the shift lever knob (C).
5. Remove the shift lever knob cover (D).
6. Remove the A/T gear position indicator panel light from the indicator panel, and remove the A/T gear position indicator panel/shift lever boot
assembly.
7. Remove the shift lock release and release spring.
8. Remove the shift lock solenoid connector and park pin switch/A/T gear position indicator panel light connector.
9. Remove the harness bands, and remove the park pin switch and A/T gear position indicator panel light.
10. Release the lock tabs retaining the shift lock solenoid using thin blade screwdrivers.