RDX L4-2.3L Turbo (2008)
Shifter A/T: Removal and Replacement
Shift Lever Knob, Shift Lever Knob Cover, and Shift Lever Button Ring Replacement
Shift Lever Knob, Shift Lever Knob Cover, and Shift Lever Button Ring Replacement
1. Remove the shift lever.
2. Grasp the shift lever boot ring, and slip it out of the shift lever knob cover.
3. Remove the shift lever button ring (A). If the shift lever button ring is only replaced, skip steps 4 thru 8 and go to step 9.
4. Remove the screws (B), then remove the shift lever knob (C).
5. Remove the shift lever knob cover (D).
6. Replace the shift lever knob or knob cover.
7. Install the shift lever knob cover over the shift lever boot ring.
8. Install the shift lever knob, and secure the shift lever knob with the screws.
9. Install the shift lever button ring.
10. Install the shift lever.