RDX L4-2.3L Turbo (2008)
Shifter A/T: Removal and Replacement
Paddle Shifter + (Upshift Switch) Replacement
Paddle Shifter + (Upshift Switch) Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures in the SRS before doing repair or
service.
1. Remove the steering wheel.
2. Remove the four screws (A) securing the steering wheel rear cover (B), then remove the steering wheel rear cover.
3. Disconnect the paddle shifter + (upshift switch) connector. Remove the screw securing the paddle shifter +, and remove the paddle shifter +.
4. Install the new paddle shifter + on the steering wheel.
5. Connect the paddle shifter + connector securely, and install the connector in the connector holder.
6. Install the steering wheel rear cover, and secure the rear cover with the screws.
7. Install the steering wheel.
