RDX L4-2.3L Turbo (2008)
11. Attach the clips (A), fasteners (B), upper rubber dam (C), and side rubber dams (D) with adhesive tape to the inside face of the rear window (E) as
shown. Before installing the upper and side rubber dams, apply primer to the inside face of the rear window.
-
Be sure the clips, fasteners, and upper rubber dam line up with alignment marks (F).
-
With the printed dots (G) on the rear window as a guide, attach the side rubber dam to both side portions of the rear window.
-
Be careful not to touch the rear window where adhesive will be applied.
