RDX L4-2.3L Turbo (2008)
17. With a sponge, apply a light coat of body primer to the original adhesive remaining around the rear window opening flange. Let the body primer
dry for at least 10 minutes:
-
Do not apply body primer to any remaining original adhesive on the flange.
-
Be careful not to mix up the body and glass primer sponges.
-
Never touch the primed surfaces with your hands.
18. Before filling a cartridge cut a "V" in the end of the nozzle (A) as shown.
19. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive