RDX AWD L4-2.3L Turbo (2010)
Hood Sensor/Switch (For Alarm): Testing and Inspection
Security Hood Switch Test
1. Open the hood.
2. Remove the front bumper See: Body and Frame/Bumper/Front Bumper/Service and Repair.
3. Remove the hood lock cover See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch/Service and Repair.
4. Disconnect the 2P connector from the security hood switch.
5. Check for continuity between the terminals.
-
There should be continuity between terminals No. 1 and No. 2 when the hood is opened (latch released).
-
There should be no continuity between terminals No. 1 and No. 2 when the hood is closed and completely latched.
6. If the continuity is not as specified, replace the hood latch See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch/Service and Repair.
