RDX AWD L4-2.3L Turbo (2010)
Rear Vision Camera: Service and Repair
Rearview Camera Removal/Installation
1. Remove the rear license trim See: Body and Frame/Exterior Moulding / Trim/License Plate Frame/Service and Repair.
2. Remove the inner taillight See: Lighting and Horns/Tail Lamp/Service and Repair.
3. Inside the tailgate, disconnect the rearview camera 6P connector (A) and free it from its mounting clip. Remove grommet (B) from the tailgate,
then push the rearview camera connector through the hole in the tailgate.
4. Remove screws (A), then remove the rearview camera (B).
5. Install in the reverse order of removal.
