RDX AWD L4-2.3L Turbo (2010)
Driver/Vehicle Information Display: Testing and Inspection
Multi-information Switch Test/Replacement
1. Remove the driver's airbag assembly See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver's
Airbag Replacement.
2. Disconnect the 7P connector (A) from the multi-information switch (B).
3. Remove the steering wheel cover (C) from the steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Overhaul
.
4. Remove the multi-information switch from the steering wheel by removing the four screws.
5. Measure the resistance between the multi-information switch 7P connector terminals No. 2 and No. 6 in each switch position according to the
table.
6. If the resistance is not as specified, replace the switch.
7. If the switch is OK, but there is a problem with the switch function, check the cable reel subharness and cable reel.