RDX AWD L4-2.3L Turbo (2010)
Navigation Function Selector Switch: Service and Repair
Navigation Switch Panel Removal/Installation
1. Remove the center panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Dashboard Center
Panel Removal/Installation.
2. Remove the screws (A) and navigation switch panel (B) from the center panel.
3. Remove the screws (A) and jog dial (B) from the interface dial (C).
4. Disconnect the connector (D), then remove the interface dial.
5. If necessary, remove the screws (E) and cover (F), then remove the bulbs (G).
6. Install the interface dial in the reverse order of removal.
