acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Speaker:|10-027|Page 4897 > < All Technical Service Bulletins for Speaker:|10-027
Page 2
background image

NOTE:

There are separate warranty numbers depending on which side of the vehicle you begin. For example, if you replace the left front speaker, then
the right, use OP # 012100 and combo code A to file your warranty claim.

Failed Part:

P/N 39120-TK4-A51

Defect Code:

03217

Symptom Code:

03220

Skill Level:

Repair Technician

DIAGNOSIS

Do the speaker check mode to isolate the faulty speaker(s):

1. Turn the ignition switch to ON (II).

2. Make sure the audio system is turned off.

3. Push and hold the No.1 and No.3 preset buttons.

4. While holding the preset buttons, push the PWR knob to on.

5. Release the buttons and the speaker check mode begins. A test tone should sound from one speaker as indicated on the display.

6. Each time you press the SEEK/SKIP CATEGORY button, the test moves to the next speaker.

7. The speaker check mode ends when you turn the audio unit off, or turn the ignition switch to LOCK (0).

REPAIR PROCEDURE

Replace the applicable speaker(s):

^

Refer to the audio section of the appropriate service manual, or

All Technical Service Bulletins for Speaker:|10-027|Page 4897 > < All Technical Service Bulletins for Speaker:|10-027