RDX AWD L4-2.3L Turbo (2010)
Voice Activation Switch: Testing and Inspection
Voice Control Switch Test
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair in
the SRS section before doing repairs or service.
1. Remove the HFL-navigation voice control switch See: Service and Repair.
2. Measure the resistance between terminals No. 3 and No. 5 in each switch position according to the table.
3. If the resistance is not as specified, replace the HFL-navigation voice control switch See: Service and Repair.
4. Use a diode tester between the terminals in each switch position according to the table.
5. If the diode test is not as specified, replace the HFL- navigation voice control switch See: Service and Repair.