RDX AWD L4-2.3L Turbo (2010)
Front Bumper: Service and Repair
Front Bumper Removal/Installation
NOTE:
-
Have an assistant help you when removing and installing the front bumper.
-
Take care not to scratch the front bumper or the body.
-
Put on gloves to protect your hands.
1. Remove the screws (A, B), the clips (C, D), and the bolts (E) securing the front bumper (F).
NOTE: To release the clips, pry up on the center pin at the notch (G).
2. Pull on the front bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).