RDX AWD L4-2.3L Turbo (2010)
4. Disconnect the windshield washer tubes (G).
5. Remove the driver's cowl panel (A).
1. Remove the clips (B).
2. Release two front hooks (C) from the edge of the cover.
3. Detach the clips (D, E) by carefully pulling the cover upward, then remove the cover. Take care not to scratch the body.
6. Install the cover in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Make sure the washer tube is connected securely.
-
Push the clips and the hooks into place securely.
