RDX AWD L4-2.3L Turbo (2010)
Trunk / Liftgate Hinge: Service and Repair
Tailgate Hinge Cover Replacement
NOTE: Take care not to scratch the tailgate hinge cover or the body.
1. Open the tailgate. Release the inside hook (A) from the tailgate hinge (B) by pulling the rear of the tailgate hinge cover (C) up.
2. Slide the tailgate hinge cover rearward to release it from the pin (D), and to disengage it from the rear end of the roof molding (E), then move the
cover forward while lifting it. Close the tailgate, then remove the cover.
3. Install the cover in the reverse order of removal.
