RDX AWD L4-2.3L Turbo (2010)
Trunk / Liftgate Switch: Service and Repair
Tailgate Outer Handle Switch Test/Replacement
1. Open the tailgate.
2. Remove the tailgate lower trim panel .
3. Remove the rear license trim See: Exterior Moulding / Trim/License Plate Frame/Service and Repair.
4. Disconnect the 3P connector (A) and remove the two bolts.
5. Check for continuity between the terminals.
-
There should be continuity between terminals No. 2 and No. 3 when the switch is pressed.
-
There should be no continuity between terminals No. 2 and No. 3 when the switch is released.
6. If the continuity is not as specified, replace the tailgate outer handle switch.
