RDX AWD L4-2.3L Turbo (2010)
Body Emblem: Service and Repair
Emblem/Sticker Replacement
NOTE: When removing the emblems, take care not to scratch the body.
1. To remove the front "A" emblem, remove the front emblem base See: Grille/Service and Repair.
2. Clean the body bonding surface where emblems are applied with a shop towel dampened in isopropyl alcohol. After cleaning, keep oil, grease, and
water from getting on the surface.
3. Apply the emblem/sticker where shown.
4. After installing the front "A" emblem, reinstall the front grille See: Grille/Service and Repair.
