RDX AWD L4-2.3L Turbo (2010)
Subframe: Service and Repair
Subframe Replacement
Front Subframe Torque
-
Before removing the subframe, make a mark where the subframe lines up with the body for reinstallation.
-
After loosening the subframe mounting bolts, be sure to replace them with new ones.
-
When installing, align both installation reference holes in the subframe with both reference holes in the body using a screwdriver or tapered punch
as a guide.
-
After reinstalling all removed parts, check and adjust the front wheel alignment See: Maintenance/Alignment/Service and Repair.
1. Loosely install new front subframe mounting bolts, then tighten the bolts to the specified torque in the sequence shown.
Rear Subframe Torque
NOTE: After removing the subframe mounting bolts, be sure to replace them with new ones.