acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service and Repair|Page 5244 > < Air Bag(s) Arming and Disarming|Service and Repair|Page 5242
Page 12
background image

Side Curtain Airbag

7. Remove the quarter pillar trim.  See: Trim Panel/Service and Repair/Pillar Trim/Interior Trim Removal/Installation - Pillar Areas

8. Disconnect both SRS wire harness 2P connectors (A) from the side curtain airbags.

Seat Belt Tensioner

9. Remove the front and rear door sill trim  See: Scuff Plate/Service and Repair.

10. Remove the B-pillar lower trim  See: Trim Panel/Service and Repair/Pillar Trim/Interior Trim Removal/Installation - Pillar Areas, then disconnect

both SRS wire harness 4P connectors (A) from the seat belt tensioners.

Seat Belt Buckle Tensioner

11. Disconnect both SRS wire harness 4P connectors (A) from the seat belt buckle tensioners.

Air Bag(s) Arming and Disarming|Service and Repair|Page 5244 > < Air Bag(s) Arming and Disarming|Service and Repair|Page 5242