RDX AWD L4-2.3L Turbo (2010)
Drink Holders: Service and Repair
Rear Seat Armrest Beverage Holder Replacement
Rear Seat Armrest Beverage Holder Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to tear or damage the seat covers.
1. Using a trim tool, push in at the ribs (A) of the rear hooks (B) to pull up the beverage holder (C), then release the hooks from the wire (D).
2. Release the front hooks (A) from the wire (B), then remove the beverage holder (C).