RDX AWD L4-2.3L Turbo (2010)
4. Pull out the front door opening seal (A) from the trim hooks (B) around the front door opening flange, then remove the seal.
5. Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the tabs, and the hooks into place securely.
Rear Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to bend or scratch the trim or the panels.
1. Tip the front of the rear seat up.