RDX AWD L4-2.3L Turbo (2010)
Sun Visor: Service and Repair
Sunvisor Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to bend or scratch the sunvisor or the headliner.
1. From both sides, using a trim tool, release the tabs (A) from the bracket (B).
2. Remove the sunvisor cap (A) from the bracket (B). Turn the cap, and remove it.
3. Remove the sunvisor (A).
1. Using a TORX T25 bit, remove the self-tapping ET screws.
2. Remove the sunvisor from the body and the holder (B).
3. Disconnect the vanity mirror light connector (C).