RDX AWD L4-2.3L Turbo (2010)
Keyless Entry: Component Tests and General Diagnostics
Keyless Entry Transmitter Test
Keyless Entry Transmitter Test
NOTE:
-
If the doors unlock or lock with the transmitter, but the LED on the transmitter does not come on, the LED is faulty; replace the transmitter.
-
If any door is open, you cannot lock the doors with the transmitter.
-
If you unlocked the doors with the transmitter, but do not open any of the doors within 30 to 90 seconds, the doors relock automatically.
-
The doors do not lock/unlock, and panic does not work with the transmitter if the ignition key is inserted in the ignition switch.
With HDS
1. Press the transmitter lock or unlock button at least 10 times to reset the transmitter.
-
If the locks work, the transmitter is OK.
-
If any of the transmitter buttons do not work, replace the transmitter, then do the transmitter programming register See: Accessories and
Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning.
-
If the locks don't work, go to step 2.
2. Connect the HDS to the data link connector.
3. Select the KEYLESS TRANSMITTER from the BODY ELECTRICAL menu, then enter KEYLESS CHECK.
4. Follow the screen prompts to change to check each button operation.
NOTE: The door lock actuators may or may not cycle when receiving input from the transmitter.
-
If KEYLESS ENTRY TRANSMITTER CODE IS RECEIVED is indicated, the transmitter is OK.
-
If DIFFERENT KEYLESS ENTRY TRANSMITTER CODE IS RECEIVED is indicated, the transmitter is not registered to the vehicle, if
necessary, reprogram and register the transmitter See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and
Inspection/Programming and Relearning.
-
If KEYLESS ENTRY TRANSMITTER CODE IS NOT RECEIVED is indicated, go to step 5.
5. Open the transmitter and check for water damage.
-
If you find any water damage, replace the transmitter, then reprogram and register the new transmitter See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning.
-
If there is no water damage, go to step 6.
6. Replace the transmitter battery (A) with a new one, and press lock or unlock button and check the receive condition on the screen of the HDS.
-
If KEYLESS ENTRY TRANSMITTER CODE IS RECEIVED is indicated, the transmitter is OK.
