acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Door Lock Actuator Test|Page 5361 > < Door Lock Actuator Test|Page 5359
Page 1
background image

Keyless Entry: Component Tests and General Diagnostics
Keyless/Power Door Locks/Security System (MICU) Input Test

Keyless/Power Door Locks/Security System (MICU) Input Test

1. Turn the ignition switch to LOCK(0).

2. Remove the driver's dashboard undercover  See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver's Dashboard

Undercover Removal/Installation.

3. Check the No. 10 (7.5 A) and No. 25 (20 A) fuses in the under-dash fuse/relay box. If any fuse is blown, replace it and go to step 4.

4. Disconnect under-dash fuse/relay box connectors E, F, G, M, N, Q, R, and T.

NOTE: All connector views are shown from wire side of female terminals.

Door Lock Actuator Test|Page 5361 > < Door Lock Actuator Test|Page 5359