RDX AWD L4-2.3L Turbo (2010)
Power Mirror Motor: Service and Repair
Power Mirror Actuator Replacement
1. Remove the mirror holder See: Service and Repair/Mirror Holder Replacement.
2. Remove the visor See: Lighting and Horns/Turn Signals/Turn Signal Lamp/Service and Repair.
3. Remove the power mirror See: Service and Repair/Power Mirror Replacement.
4. Disconnect the 14P connector from the mirror.
5. Remove the three TORX screws using a tamper-proof T10 TORX bit, then remove the actuator (A).
6. Remove the connectors (A), then remove the screw (B) and separate the harness (C) from the power mirror.