RDX AWD L4-2.3L Turbo (2010)
Seat Heater: Testing and Inspection
Seat Heater Test
Driver's Seat
1. Remove the driver's seat See: Service and Repair/Front Seat Removal/Installation.
2. Remove the back cover for seat-back heater See: Seat Cover/Service and Repair/Front Seat-back Cover/Pad Replacement.
3. Disconnect the 3P connector (A) and 2P connector (B) from the seat heater.
4. Check for continuity between seat-back heater 2P connector terminals No. 1 and No. 2. There should be continuity.
5. Check for continuity between seat cushion 3P connector terminals No. 1 and No. 2, and terminals No. 1 and No. 3. There should be continuity.
6. If the continuity is not as specified, replace the appropriate seat heater.
Front Passenger's Seat
1. Remove the passenger's seat See: Service and Repair/Front Seat Removal/Installation.
2. Disconnect the 4P connector (A) from the seat heater.