RDX AWD L4-2.3L Turbo (2010)
Splash Guard: Service and Repair
Front Splash Shield Replacement
Front Splash Shield Replacement
NOTE: Take care not to scratch the body.
1. Remove the splash shield (A).
1. From under the front bumper (B), remove the screws (C).
2. From under the body, remove the clips (D, E).
3. Pull the splash shield out.
NOTE: To release the clips, pry up on the center pin at the notch (F).
2. Install the splash shield in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
