RDX AWD L4-2.3L Turbo (2010)
Braking Sensor/Switch: Testing and Inspection
Brake Pedal Position Switch Test
1. Disconnect the 4P connector (A) from the brake pedal position switch (B).
2. Check for continuity between terminals No. 1 and No. 2.
-
There should be continuity when the brake pedal is pressed.
-
There should be no continuity when the brake pedal is released.
3. Check for continuity between terminals No. 3 and No. 4 (for cruise control).
-
There should be no continuity when the brake pedal is pressed.
-
There should be continuity when the brake pedal is released.
4. If the test results are not as specified, adjust the switch, or adjust the pedal height See: Brake Pedal Assy/Adjustments. If the result are still not as
specified, replace the switch.