RDX AWD L4-2.3L Turbo (2010)
Brake Rotor/Disc: Service and Repair
Rear Brake Disc Replacement
Rear Brake Disc Replacement
NOTE: Keep any grease away from the brake disc/drum and the brake pads.
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Remove the rear wheel.
3. Release the parking brake pedal fully.
4. Remove flange nuts (A), then remove the brake hose mounting bracket.
5. Remove the brake caliper bracket mounting bolts (B), and remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper from the undercarriage. Do not twist the brake hose excessively.
6. Remove the two washers (A).
7. Remove the brake disc/drum flathead screws (A).
